Description
General
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Frequency coverage* (*Varies according to version) |
136–174 MHz | 400–470 MHz (ALL) 450–512 MHz (USA) 450–520 MHz (EXP) |
335–380 MHz (EXP) 400–470 MHz (ALL) 450–512 MHz (USA) 450–520 MHz (EXP) |
||
| Number of channels | 128 channels/ 8 zones | 16 channels | 128 channels/ 8 zones | 16 channels | |
| Type of emission | 16K0F3E*/11K0F3E (USA/EXP) | ||||
| 16K0F3E/14K0F3E/8K50F3E (EUR) | |||||
| Power supply requirement | 7.5V DC nominal | ||||
| Current drain (approx.) |
Tx | 1.3A | |||
| Rx | 500 mA /77 mA (Max. audio (internal SP)/Standby) |
500 mA /80 mA (Max. audio (internal SP)/Standby) |
|||
| Antenna impedance | 50Ω | ||||
| Operating temperature range (Radio specification) |
–30°C to +60°C; –22°F to +140°F (Radio specification) (USA/EXP) |
||||
| –25°C to +55°C (Radio specifi cation) (EUR) |
|||||
| Dimensions (W × H × D; Projections not included) |
52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in (With BP-279) | ||||
| Weight (approx.) | 240 g; 8.5 oz (With BP-279) | ||||
*16k0F3E (30 kHz bandwidth) is no longer available for FCC Part 90 licensees for USA versions.
Transmitter
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Output power (Hi, L2, L1) |
5 W, 2 W, 1 W | 4 W, 2 W, 1 W | |||
| Maximum frequency deviation | ± 5.0 kHz (25 kHz)*, ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) | ||||
| Spurious emissions | 70 dB minimum (USA/EXP) | ||||
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR) | |||||
| Frequency stability | ±2.5ppm | ||||
| Audio harmonic distortion | 1.0% typical (25/20 kHz), 1.5% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
||||
| FM Hum and Noise (without CCITT filter) |
46 dB typical (25 kHz), 40 dB typical (12.5 kHz) (USA/EXP) |
||||
| Residual modulations (with CCITT filter) |
50 dB typical (25 kHz), 47 dB typical (20 kHz), 44 dB typical (12.5 kHz) (EUR) |
53 dB typical (25 kHz), 51 dB typical (20 kHz), 48 dB typical (12.5 kHz) (EUR) |
|||
| External microphone connector | 3-conductor 2.5 (d) mm (1/10)/2.2 kΩ | ||||
* 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.
Receiver
| IC-F1000T/S | IC-F1000 | IC-F2000T/S | IC-F2000 | ||
|---|---|---|---|---|---|
| Sensitivity | (at 12dB SINAD) | 0.25μV typical | |||
| (at 20dB SINAD) | –4 dBμV typical emf | ||||
| Adjacent channel selectivity | 76 dB typical (25 kHz), 53 dB typical (12.5 kHz) (TIA-603D) 78 dB typical (25 kHz), |
73 dB typical (25 kHz), 56 dB typical (12.5 kHz) (TIA-603D) 74 dB typical (25 kHz), |
|||
| 76 dB typ. (25 kHz), 72 dB typ. (20 kHz), 53 dB typ. (12.5 kHz) (EUR) |
73 dB typ. (25 kHz), 73 dB typ. (20 kHz), 56 dB typ. (12.5 kHz) (EUR) |
||||
| Spurious response rejection | 70dB minimum | ||||
| Intermodulation rejection | 74 dB typical (USA/EXP) | 73 dB typical (USA/EXP) | |||
| 68 dB typical (EUR) | 67 dB typical (EUR) | ||||
| Hum and noise | (With CCITT filter) | 51 dB typical (25 kHz), 45 dB typical (12.5 kHz) (USA/EXP) |
49 dB typical (25 kHz), 43 dB typical (12.5 kHz) (USA/EXP) |
||
| (Without CCITT filter) | 52 dB typical (25 kHz), 49 dB typical (20 kHz), 46 dB typical (12.5 kHz) (EUR) |
52 dB typical (25 kHz), 50 dB typical (20 kHz), 47 dB typical (12.5 kHz) (EUR) |
|||
| AF output power (at 5% distortion 8Ω load ) |
Internal SP | 1500 mW typical | |||
| External SP | 400 mW typical (Single end) 1500 mW typical (BTL, HM-222HLWP connected*) |
||||
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8)/8 Ω | ||||
All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).
* For the transceiver with “U” make on the serial number label.
Function Comparison and Internal Unit Options
| IC-F1000/S/T IC-F2000/S/T | ||
|---|---|---|
| Number of option slots | – | |
| CTCSS/ DTCS | encoder | Available |
| decoder | Available | |
| 2-Tone | encoder | Available |
| decoder | Available | |
| 5-Tone | encoder | Available |
| decoder | Available | |
| DTMF autodial | Available | |
| DTMF decoder | – | |
| Voice Scrambler | Inversion | Available |
| Non-rolling | – | |
| Rolling | – | |
| APCO P25 digital | – | |
| 6.25kHz digital | – | |
| MDC 1200 | Available (Limited functions) | |
| Motion function | Available | |
| Lone worker function | Available | |
| Man down function | Available | |
| Intrinsically safe | – | |
| Voice announcement | Available | |
| Audio compander | Available | |
| GPS receiver | – | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage | 500.5 I | I |
| Low Pressure Operation | 500.5 | II |
| High Temperature Storage | 501.5 | I |
| High Temperature Operation | 501.5 | II |
| Low Temperature Storage | 502.5 | I |
| Low Temperature Operation | 502.5 | II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing | 506.5 | I |
| Rain Drip | 506.5 | III |
| Humidity Induced | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock Functional | 516.6 | I |
| Shock Transit Drop | 516.6 | IV |
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Ingress Protection Standard (IC-F1000/T/S, IC-F2000/T/S & HM-168LWP) | |
|---|---|
| Dust & Water | IP67 (Dust-tight and waterproof protection) |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Battery pack, BP-279
- Desktop charger, BC-213*
- AC adapter, BC-123SA/SE/SUK/SV or BC-242*
- Belt clip, MB-133
- Antenna
*May differ depending on version
Reviews
There are no reviews yet.